Showing posts with label software. Show all posts
Showing posts with label software. Show all posts

18 Nov 2018

Tropo forecasts

Although I rarely use this myself, there is a useful program to predict tropo openings on 2m.

16 Sept 2015

Meteor Scatter software

Steve G1KQH (font of all knowledge) sent me this a few days ago:-


"Did you see a mention of this software in PW, Roger?

Might be useful via your bent wonky wheel?


73 Steve
http://www.g1kqh.talktalk.net/"

9 Oct 2012

Improved Software VLF Receiver

SWL Roland's enhanced SM6LKM software VLF receiver
An SWL called Roland from Germany has produced an enhanced version of SM6KLM's software VLF receiver, originally designed to allow reception of SAQ on 17.2kHz CW. The new version has:
  •  44.1k/48k/88.2k/96k/176.4k/192k sample rate support
  • More CW filters, SSB filter and AM filter added
  • Spectrum display for audio frequency
  • File-I/O for *.wav format (16bit)
  • Left/Right channel select
  • RMS signal level bar for audio level
  • Muting (M) key
  • Time+Date display, UTC or local time
This now makes the "enhanced" SM6KLM software receiver a superb tool for VLF use. Information and downloads are available at Roland's website https://sites.google.com/site/swljo30tb/

To use the receiver all that is needed is a VLF signal feeding into the mic input of the PC. Be sure you know what you are doing: the usual safe thing to do is to put a couple of back-to-back diodes across the DC isolated VLF input to prevent damage to the sound card. With an E-field probe antenna this receiver is capable of receiving many VLF transmitters from around the world. I shall be using it in future to monitor my 8.97kHz earth-mode CW beacon when out in the field testing.  

2 Mar 2012

SpectrumView for iPod/iPhone

SpectrumView 0-24kHz displays of waterfall and spectrum
Looking around for useful (free) software to help me with VLF and lightbeam tests I came across SpectrumView yesterday. This is a fabulous application for the iPhone, iPod Touch and iPad which provides a 0-24kHz spectrum analyser and a waterfall display.  The app is produced by Oxford Wave Research.

To make best use of this I need to connect an external audio input into my iPod Touch 4g.  A 4-pin jack plug when inserted, rather than a 3-pin one, allows an external audio input (or a mic) to be connected so I can feed my VLF receivers, used for both 8.7-9.1kHz earth-mode comms and for lightbeam baseband/sub-carrier detection, directly into the iPod.  Resolution will be down to around 2Hz at best, so this will be of somewhat limited use, but certainly easier than a laptop for quick field tests or quantitative measurements.

The mic input (on a 4-pin jack) is on pin 4 (nearest the plug cover) and the ground is the next one down the connector (pin 3). The tip (pin 1) and pin next to the tip (pin 2) are the two audio outputs for a headset.


UPDATE 16.3.12: to tell the iPod Touch 4g that an external mic is connected you seem to need to have a 4k7 resistor to ground across the terminals. See later post for details.

12 Feb 2010

WSPR in QSO mode

Stations on 500kHz using WSPR in QSO mode are using the latest WSJT7 software used for modes like JT6m, JT65 and JT4. An option in the software allows the use of WSPR.  Stations are using frequencies outside of the WSPR beaconing sub-band of 503.8-504kHz. For the next few days my shack is being used as a bedroom for my little grandson, so it may be the middle of next week before I can try WSPR QSO mode.