Showing posts with label soldering iron. Show all posts
Showing posts with label soldering iron. Show all posts

9 Oct 2017

"Get out that soldering iron"

After posting a photo on Facebook of some bread rolls I made yesterday (see photo) a friend has urged me, "to get out my soldering iron" again. Well, tomorrow or later this week, I might just try.

My 630m transverter needs some attention, so I might try this first. I am told there are more people listening than transmitting on 630m WSPR and I have not yet, this season, been on 630m TX. I might give 630m FT8 TX a go too.

See http://www.iamintothis.com/2012/02/friday-food-lust-ham-cheese-chive-bread.html .

18 Apr 2015

Soldering iron mended - and NON amateur radio DIY

I am quite pleased with myself, for once.

Although I still get tired, I seem to be less profoundly tired than I was. Today I managed to remove the plug on a spare 24V Weller soldering iron tool that I found and attach it to the base/24V supply. I checked it works  - it does. So I currently have 2 working soldering irons.

Also, I managed my first (minor) DIY job by repairing a trellis support on our bungalow front wall. I also raked out some dead moss from the front lawn ready to re-seed the patches. In the past, these would have been trivial tasks, but now they are major steps on my oh so slow road to recovery.

Recovery from my cerebellum brain bleed (Sept 2013) is very slow, but I am slowly getting a little better.

29 Mar 2015

New soldering iron on order and beating disabilities

Based on recommendations, I ordered a new Antex soldering iron which should arrive later this week. In the meantime I'll try to assemble (find!) my kit for both VLF earth-mode and optical comms field work.  I am still getting very tired, so don't expect too much too soon.

The first tests will be very modest to get me back into "the swing of things".  Unless my health starts to make a big improvement, I fear I may have to live with some of my symptoms for the foreseeable future, if not for ever. This would be such a pity as there is so much I want to do. Compared with some though, I have been lucky. If at all possible, I really want to beat my disabilities. I hate being so useless. I remember my "old self" full of energy.

Fell at the first fence!

Well, what a brilliant start! NOT.

My soldering iron has failed and I cannot find the replacement as my wife packed everything when I was in hospital, so I cannot do anything that involves soldering, which is just about everything with field work. So, as I cannot afford a new Weller soldering station, I shall have to invest in a new Maplins sourced soldering iron or soldering station. Just trying to find bits in boxes has just about flattened me too. I am now exhausted.  Bother, and I was so looking forward to this day.

Any recommendations for a decent soldering iron, not Weller?

4 Oct 2012

New soldering iron needed

My old Weller soldering iron station (an old Pye Telecom chuck-out from about 1980) is on its very last legs - it is physically cracked and really does need replacing. You can tell how old it is by the mains wire colours! It was possibly the one I had on my bench when I started work in 1970.

I'm looking at the Maplin soldering iron range for a replacement, which look good value. Most of my work is with discrete parts but increasingly some SMA parts are being used too. Up to now I have been using up my stock of tin-lead solder, but am happy to move to lead free.

So, please may I have your recommendation on what soldering iron to go for?

I don't mind spending a bit more if by doing so I get a more reliable soldering station. Clearly replacement tips must be available inexpensively.